MODEL RD – 535 PUMP
The standard pump is capable to delivering 132 LPM ( 35 US GPM ) at 35 Kg. / Sq. Cm ( 500 PSI ). However it can be equipped for higher discharge and pressure. Discharge up to 150 LPM is possible. The pump is fitted with 5 Speed Transmission ( 5 Forward and 1 reverse Speeds ) for varying the discharge to suit drilling conditions.
Overview
The standard pumping unit is capable of delivering 132 LPM ( 35 US GPM ) at 35 kg./ sq. cm ( 500 PSI ) Pressure. However it can be equipped for higher discharge and pressure. Discharge up to 150 LPM is possible. The pump is fitted with 5 speed transmission ( 5 forward and 1 reverse speeds ) for varying the discharge to suit various drilling conditions. The standard power unit is 18/20 H.P. Air Cooled Diesel Engine but pump can be supplied with Electric motor or Air Motor Drive, if required.
Some salient features of above pumps :
- Valve Chamber : Specially designed and manufactured from close grained alloy iron casing to withstand high pressure.
- Ball Valve : Made of stainless steel, hardened , ground and lapped.
- Valve Seat : Made of stainless hardened and ground.
- Counter Shaft : Made of alloy steel and hardened for long service life.
- Tapered Roller Bearings : Crankshaft is supported in oversized tapered roller bearings for high load capacity and minimizing heat and wear.
- Crank case : Made from high quality grey iron casting, precision machined having honed cross head guide
Related Products
-
MODEL TGP-120 PUMP
Duplex, double acting, reciprocating Mud pump capable of delivering 75 LPM at 45 Kg./Sq. Cm. pressure or 120 LPM at 35 Kg. / Sq. cm pressure. The pumps is suitable for grouting and drilling applications . Power unit : air cooled diesel engine or electric motor as per customer’s choice.
-
MODEL RD – 470 PUMP
This is a Duplex, Double, Acting Mud Pump. It can be supplied with liners varying from 75 mm ID to 127 mm ID. The stroke is approximately 165 mm With 127 mm ID liner it gives a discharge up to 800 LPM at 22 Kg. / Sq. Cm and with 75 mm ID Liner the discharge will be 275 LPM at 63 Kg. / Sq. Cm pressure.
-
MODEL RD – 520 PUMP
The standard pumping unit is equipped for discharge of 75 LPM ( 20 US GPM ) at 35 Kg/Sq. Cm ( 500 PSI ). The discharge and pressure can be varied , if required.The pump can be supplied with or without Five Speed Transmission and is powered by Air Cooled Diesel Engine developing 9 / 12 H. P. at 1500 RPM. Optionally it can be powered by suitable Air or Electric Motor.
-
MODEL-TGP-50
Single Cylinder Double Acting Reciprocating Mud /Grout Pump having 60 LPM discharge at 20 Kg./ Sq. cm pressure. The pump can be supplied with air cooled diesel engine or electric motor to suit customer’s requirement. This is a very light weight , compact pumping unit suitable for grouting and drilling application.
